Netis WF2505 Driver – Netis WF2505 driver is a software component that allows the operating system to communicate with Netis WF2505 Wifi Adapter. For example, suppose that an application needs to read some data from a device. The application calls a function implemented by the operating system and the operating system calls a function implemented by the controller.
If you own Netis WF2505 Wifi Adapter and looking for drivers to connect your device to the computer, you have landed on the right site. You can download Netis WF2505 driver here, with a simply click on the “Download Link” below.
Although 802.11ac is now showing its presence in the market, 802.11n still has a large part of the home networking market. As such, vendors are further tweaking the existing 802.11n design and offering better high-powered solutions to offer greater reach. In the laboratory, we have one of the latest Netis products, the WF2505. This adapter uses a USB 2.0 interface and offers 150 Mbps in the 2.4 GHz band. Compatibility with WF2505 extends to Windows XP, Vista, 7 and 8, and OS X 10.4+. The MSRP for the Netis WF2505 is set at $ 49.99, with a one-year warranty.

The utility that comes with the Netis WF2505 provides a good amount of information about the surrounding networks. Here you can see that we are connected to our Linksys WRT router with 100% signal strength. The Netis Systems WF2505 is an excellent adapter for those looking for high power 802.11n capabilities. The construction quality of the WF2505 was quite good. I did not find any problem screaming with any of the materials used. An excellent feature of this adapter is that the USB connection is established through a standard cable. This adapter should not interfere with adjacent ports. The performance of the WF2505 was quite good. Although the adapter is only capable of 2.4 GHz, the device could connect to 150 Mbps in my garage, and if you follow my comments, you know that I have problems connecting many peripherals.
Netis WF2505 Driver Download
In most cases, the Windows drivers found here are “self-extracting” (.exe) files. Click on the desired file. When prompted, set the destination on your desk. Create a new folder and move the file to it. Click on the file to automatically extract the software and the associated files in your new folder. You can also extract or move these files to a floppy disk. Note that these files will only be self-extracting if they are run from Windows. After extracting the files to a disk or special directory, locate the installer, usually called “setup.exe” or “install.exe”, and then click on it to start the installation.
Sometimes, there is no installer because you have to install your driver through the Windows “Add a device” function. You can find instructions for installing drivers in the Windows Help file. Our Mac OSX files are also self-extracting. These files must be downloaded and executed in the same way. The installer will be present on the desktop once completed: click on it and follow the instructions to install it.