Netis WF2151 Driver – Netis WF2151 driver is a software component that allows the operating system to communicate with Netis WF2151 Wifi Adapter. For example, suppose that an application needs to read some data from a device. The application calls a function implemented by the operating system and the operating system calls a function implemented by the controller.
If you own Netis WF2151 Wifi Adapter and looking for drivers to connect your device to the computer, you have landed on the right site. You can download Netis WF2151 driver here, with a simply click on the “Download Link” below.
Netis WF2151 Driver Download
In the offer of the manufacturer of Netis, appeared a WF2151 dual-band USB adapter, which offers a stable connection and high performance. With two bands of 2.4 GHz and 5 GHz, it reaches speeds of up to 300 Mbps. Thanks to two integrated antennas, the device guarantees a wide wireless range. The wireless USB adapter WF2151 600 Mbps N from Netis is the solution for the most demanding users. Thanks to the use of modern technology, the 802.11n offers a stable connection and maximum efficiency. The adapter works in two band ranges: 2.4 GHz and 5 GHz and offers speeds of up to 300 Mbps. With this, you can surf the Internet freely, use e-mail, network games, HD video transmission or VoIP telephony. Working in the 5 GHz band also reduces the risk of interference from other users’ devices.
Two external 5dBi antennas guarantee optimal range and reliability. With the USB 2.0 connector and the WPS button, you can install the card easily and quickly on your desktop or laptop computer. The AP + Repeater function implemented allows you to use WF2151 to extend the coverage of the WiFi network. This is an unprecedented solution that extends the WiFi network of an additional area around the location where the computer is with the card connected. Netis, as the sole producer, provides an interface in Polish in all its products available in our market.
The most important features:
– Wireless standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
– Transmission speed: up to 300 Mbps, 2.4 GHz, up to 300 Mbps, 5 GHz
– Wireless modes: infrastructure.
– Encryption: 64/128 bit WEP, WPA-PSK / WPA2-PSK (TKIP / AES), SSID transmission visibility, MAC card filtering
– 2 antennas with a power of 5 dBi.
– Dimensions: 92.5 x 27 x 15 mm.
– Weight: 66.7 g
In most cases, the Windows drivers found here are “self-extracting” (.exe) files. Click on the desired file. When prompted, set the destination on your desk. Create a new folder and move the file to it. Click on the file to automatically extract the software and the associated files in your new folder. You can also extract or move these files to a floppy disk. Note that these files will only be self-extracting if they are run from Windows. After extracting the files to a disk or special directory, locate the installer, usually called “setup.exe” or “install.exe”, and then click on it to start the installation.
Sometimes, there is no installer because you have to install your driver through the Windows “Add a device” function. You can find instructions for installing printers in the Windows Help file. Our Mac OSX files are also self-extracting. These files must be downloaded and executed in the same way. The installer will be present on the desktop once completed: click on it and follow the instructions to install it.