Lenovo Yoga 510-15IKB Bluetooth Driver – Lenovo Yoga 510-15IKB Bluetooth driver is a software component that allows the operating system to communicate with Lenovo Yoga 510-15IKB Bluetooth Adapter Card.
If you own Lenovo Yoga 510-15IKB and looking for Bluetooth drivers, you have landed on the right site. You can download Lenovo Yoga 510-15IKB Bluetooth driver here, with a simply click on the “Download Link” below.
The Yoga 510-15IKB is equipped with a glossy 15.6-inch touch screen and a native resolution of 1920×1080 pixels. According to the service manual, Lenovo does not offer any other type of panel for the device. Although the contrast (977: 1) is good enough, it is not the case of luminance (230 cd / m²). Such a result would be acceptable for a cheap device. However, the yoga screen should handle at least 300 cd / m² because you can expect to use the device in many places. Positive: There is no PWM brightness at any time. The colors are already correct from the factory and we can measure an average gap of 4.23 for DeltaE-2000.
As a result, it simply loses the target value (DeltaE 3 smaller). A calibration can slightly improve the result and the color deviation will drop to 3.26. The improvement is much greater for gray levels. They are more balanced and have a much smaller deviation from the ideal value. There is no blue casting at any time. The screen can not cover the AdobeRGB and sRGB color spaces; we can only measure 40.4% (AdobeRGB) and 63.5% (sRGB), respectively. The Yoga 510 supports multiple modes of operation, so a screen with wide viewing angles is essential for a convertible. And the test pattern does not disappoint. Lenovo has equipped it with an IPS screen and there is no distortion of the image, even from extreme angles. Only the brightness falls slightly. You can not really use the Yoga 510 outdoors. This is due to the low brightness and the bright surface of the screen.
Lenovo Yoga 510-15IKB Bluetooth Driver Download
- Make sure you are logged in with an administrator account.
- Locate the folder where the file was downloaded.
- Locate the downloaded file and double-click on it.
- Follow the instructions on the screen.
- In the Select destination location window, click “Next”. If you want to select another folder, click Browse.
- In the Ready for installation window, click “Install.” All the necessary files will be extracted in the selected folder.