HP ProBook 470 G4 Wireless Driver – HP ProBook 470 G4 Wireless driver is a software component that allows the operating system to communicate with HP ProBook 470 G4 Wireless Adapter Card.
If you own HP ProBook 470 G4 and looking for wireless drivers, you have landed on the right site. You can download HP ProBook 470 G4 Wireless driver here, with a simply click on the “Download Link” below.
HP ProBook 470 G4 Wireless Driver Download
The touchpad has a practical size of 121 x 66 mm and offers good sliding properties. The entries are implemented reliably. A touch with two fingers can replace the right click with the mouse. However, the touchpad sometimes produces a blow. The integrated mouse buttons in the entrance area are pleasant to use and confirm entries with a discrete click. Two different screens are available for the HP ProBook 470 G4. Buyers should not make the mistake of opting for the HD + display model (1600×900 pixels). Simply looking at its technical sheet, this model already shows too many disadvantages. In addition to a much lower resolution, its brightness, viewing angle stability, contrast and reproducible color space are significantly worse than the Full HD UWVA screen (1920×1020 pixels) in our sample. The supplement shown for the top screen is 50 euros (about 53 euros) in the HP online store and will undoubtedly be a good long-term investment. It is not only in the specifications that we see good rates, but sometimes they are even exceeded. The maximum brightness of the screen, measured in the center, reaches 361 cd / m² (manufacturer: 300 cd / m²) and the contrast is 1480: 1, thanks to the low black value (manufacturer: 600: 1). 10 brightness levels adjust the brightness with sufficient precision.
We measured 141 cd / m² at level 7, which we also use for battery tests. The screen illumination of 84% is always good and, what is more important, it does not show the visible backlight that bleeds or does not code. The maximum brightness of the screen is also available in battery mode. This, combined with the matt surface, guarantees good outdoor use. The total reproducible color is above average with coverage of 91.6% of the sRGB color space. This guarantees relatively accurate color tones and balanced color reproduction. However, the color accuracy is quite modest in the delivery status. Many rates are far from the real target range. Calibration greatly improves color accuracy. All measuring points are in accordance with the standard and the colors are precise enough, even for the professional field. The average DeltaE 2000 (aberration compared to the ideal, the least advantageous) is 1.5 and the maximum DeltaE 2000 is 3.9. The stability of the viewing angle of the AU Optronics screen is very good. No inverted or discolored colors have been discovered. Only a slight red tone and a slight variation in brightness at acute viewing angles were observed.
- Make sure you are logged in with an administrator account.
- Locate the folder where the file was downloaded.
- Locate the downloaded file and double-click on it.
- Follow the instructions on the screen.
- In the Select destination location window, click “Next”. If you want to select another folder, click Browse.
- In the Ready for installation window, click “Install.” All the necessary files will be extracted in the selected folder.