HP ProBook 455 G3 Bluetooth Driver – HP ProBook 455 G3 Bluetooth driver is a software component that allows the operating system to communicate with HP ProBook 455 G3 Bluetooth Adapter Card.
If you own HP ProBook 455 G3 and looking for Bluetooth drivers, you have landed on the right site. You can download HP ProBook 455 G3 Bluetooth driver here, with a simply click on the “Download Link” below.
HP ProBook 455 G3 Bluetooth Driver Download
We emphasize that the laptop is loaded with unrealistic charges to identify any potential problem of limitation or stability. When Prime95 is stressed, the processor will be able to maintain a stable central clock speed of 2.3 GHz against a base clock of 1.8 GHz. This reflects our initial test A10-8700P where the clock speeds were as high as 2.3 GHz when the four were loaded nuclei. Similarly, when the FurMark processor is requested, the integrated Radeon graphics processor will be able to maintain a stable 720 MHz clock. Regardless of the workload, the core temperature remains relatively low in the 60 ° C range. Run Prime95 and FurMark simultaneously it will reduce the performance of the CPU and the GPU while the temperature stays within 60 degrees. . Interestingly, the graphics processor runs at a slower clock speed when it is subject to the Unigine Valley voltage compared to the FurMark voltage, unlike most systems equipped with an Intel or Nvidia graphics processor. The operation of the battery will not limit the power to the processor or the graphics processor. A battery 3DMark 11 battery returned scores of Physics and Graphics of 2285 and 1446 points, respectively, against 2310 and 1443 points when connected to the sector.
The system fan is always active, regardless of the workload on the screen. Fortunately, its audible range is narrow as expected in a low-power office notebook. We were able to record a fan noise of just over 36 dB (A) when the extreme processing loads were slightly lower than those of the HP 15z and the ThinkPad E560 under similar conditions. The surface temperatures are not as flat as we would like when the system is inactive. For example, the lower center part of the laptop can reach a temperature equivalent to 31 ° C simply in the standby mode. Surfaces can reach 44 ° C under extreme processing loads, both on the back and on the front of the notebook. Unfortunately, the hot spot is directly in the center of the keyboard surface, which can be disadvantageous for typists. In comparison, the palm rest remain cold and we were not bothered by the heating of the surfaces during regular daily loads. The sound quality of the internal stereo speakers is acceptable for a professional laptop. The bass is very poor, as shown by the measurements of our microphone below, where the sound curve decreases considerably and at a higher frequency compared to the Dell XPS 13 or the HP Specter 13. The volume is higher than in the Dell, but the overall quality seems unbalanced, especially at higher volume settings. Fortunately, the speakers do not introduce static or surface reverberation.
- Make sure you are logged in with an administrator account.
- Locate the folder where the file was downloaded.
- Locate the downloaded file and double-click on it.
- Follow the instructions on the screen.
- In the Select destination location window, click “Next”. If you want to select another folder, click Browse.
- In the Ready for installation window, click “Install.” All the necessary files will be extracted in the selected folder.