Edup EP-N1567 Driver – Edup EP-N1567 driver is a software component that allows the operating system to communicate with Edup EP-N1567 Wifi Adapter. For example, suppose that an application needs to read some data from a device. The application calls a function implemented by the operating system and the operating system calls a function implemented by the controller.
If you own Edup EP-N1567 Wifi Adapter and looking for drivers to connect your device to the computer, you have landed on the right site. You can download Edup EP-N1567 driver here, with a simply click on the “Download Link” below.
EDUP EP-N1567 is a wireless network card designed specifically for laptops and desktops. It complies with the IEEE802.11b / g / n wireless standard, which can resolve a low gain in singal when surfing the Internet. It is also a powerful high power wifi adapter. When used as a soft access point, the high-power wireless USB adapter can create a wireless Internet network capable of transmitting the wifi signal for your laptop, tablet, iPad, etc. The appearance adopts the design of the Chinese tripod, which is filled with Chinese elements.
EDUP EP-N1567 High Power 300Mbps Wi-Fi Wireless-N USB Adapter Features :
- High performance wireless networking USB adapter
- Transmission rate is up to 300Mbps
- 2.4GHz ISM band
- Allows you to freely surf the internet
- Brand: EDUP
- Model: EP-N1567
- Chipset: RTL8192CU
- Interface: USB2.0
- Frequency: 2.4GHz ISM band
- Transmission Speed: Up to 300Mbps Gain 8dBi
- Wireless Standards: IEEE 802.11b/g/n
- Security: 16/128 bit WEP Encryption, WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/ AES
- Operating Systems: Windows 2000, XP 32/64-bit, Vista, 7, 8 32/64-bit, Linux and Mac
Edup EP-N1567 Driver Download
In most cases, the Windows drivers found here are “self-extracting” (.exe) files. Click on the desired file. When prompted, set the destination on your desk. Create a new folder and move the file to it. Click on the file to automatically extract the software and the associated files in your new folder. You can also extract or move these files to a floppy disk. Note that these files will only be self-extracting if they are run from Windows. After extracting the files to a disk or special directory, locate the installer, usually called “setup.exe” or “install.exe”, and then click on it to start the installation.
Sometimes, there is no installer because you have to install your driver through the Windows “Add a device” function. You can find instructions for installing printers in the Windows Help file. Our Mac OSX files are also self-extracting. These files must be downloaded and executed in the same way. The installer will be present on the desktop once completed: click on it and follow the instructions to install it.