Edup EP-AC1661 Driver – Edup EP-AC1661 driver is a software component that allows the operating system to communicate with Edup EP-AC1661 Wifi Adapter. For example, suppose that an application needs to read some data from a device. The application calls a function implemented by the operating system and the operating system calls a function implemented by the controller.
If you own Edup EP-AC1661 Wifi Adapter and looking for drivers to connect your device to the computer, you have landed on the right site. You can download Edup EP-AC1661 driver here, with a simply click on the “Download Link” below.
EDUP 802.11AC 600 Mbps Dual band 2.4 GHz / 5 GHz The wireless Bluetooth USB adapter 4.2 is a Bluetooth and 2 in 1 WiFi and a powerful device ideal for connecting a desktop computer to a wireless network and Bluetooth. It is an ultra-slim mini size and very comfortable to use (plug and play)! It works on 2.4G and 5.Ghz. Two functions in one device, it can work as an AC600 dual band USB WiFi adapter and a Bluetooth4.2 USB key. It is perfect for PCs, DVBs, TV decoders and other devices that require WiFi and Bluetooth.
Edup EP-AC1661 Specification
Complied with 2.4GHz & 5GHz IEEE802.11a/b/ac Draft2.0 Standards
20Mhz and 40MHz,80MHZ bandwidth transmission
Wireless security-64/128 bit WEP,WPA,WPA2
QoS Enhancement WMM
DSSS with DBPSK and DQSK,CCK modulation with long and short preamble
OFDM with BPSK,QPSK,16QAM,256QAM Modulation
USB 2.0 Interface
WPS hardware button
Support Soft AP
Driver free, Plug and Play
Bluetooth Version 4.2
AC600 WiFi and Bluetooth 4.2 2 in 1 device
Edup EP-AC1661 Driver Download
In most cases, the Windows drivers found here are “self-extracting” (.exe) files. Click on the desired file. When prompted, set the destination on your desk. Create a new folder and move the file to it. Click on the file to automatically extract the software and the associated files in your new folder. You can also extract or move these files to a floppy disk. Note that these files will only be self-extracting if they are run from Windows. After extracting the files to a disk or special directory, locate the installer, usually called “setup.exe” or “install.exe”, and then click on it to start the installation.
Sometimes, there is no installer because you have to install your driver through the Windows “Add a device” function. You can find instructions for installing printers in the Windows Help file. Our Mac OSX files are also self-extracting. These files must be downloaded and executed in the same way. The installer will be present on the desktop once completed: click on it and follow the instructions to install it.