Edup EP-9602GS Driver – Edup EP-9602GS driver is a software component that allows the operating system to communicate with Edup EP-9602GS PCIe Wifi Adapter. For example, suppose that an application needs to read some data from a device. The application calls a function implemented by the operating system and the operating system calls a function implemented by the controller.
If you own Edup EP-9602GS PCIe Adapter and looking for drivers to connect your device to the computer, you have landed on the right site. You can download Edup EP-9602GS driver here, with a simply click on the “Download Link” below.
The Realtek RTL8111F EP-9602GS Gigabit Ethernet EDUP controller combines a media access controller (MAC) compatible with IEEE 802.3 with a single-speed Ethernet transceiver, a PCI Express bus controller and an integrated memory. With state-of-the-art DSP technology and mixed-mode signal technology, the RTL8111F offers high-speed transmission over a UTP CAT 5 UTP or CAT 3 UTP cable (only 10 Mbps). Functions such as crossover detection and automatic correction, polarity correction, adaptive equalization, interference cancellation, echo cancellation, synchronization recovery and error correction are possible. implemented to provide robust transmission and reception capacity at high speeds.
Edup EP-9602GS Features :
- A single 10/100/1000Mbps compatible RJ45 Ethernet port
- Gigabit detection and Link/Activity LED indicators
- Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards
- Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x
- Full Duplex Flow Control
- Jumbo frame support
- Full and half duplex support
- Supports Wake-on-LAN function
- Crossover Detection & Auto-Correction (Auto MDI/MDI-X)
- Includes a low profile/half-height installation bracket
Edup EP-9602GS Driver Download
In most cases, the Windows drivers found here are “self-extracting” (.exe) files. Click on the desired file. When prompted, set the destination on your desk. Create a new folder and move the file to it. Click on the file to automatically extract the software and the associated files in your new folder. You can also extract or move these files to a floppy disk. Note that these files will only be self-extracting if they are run from Windows. After extracting the files to a disk or special directory, locate the installer, usually called “setup.exe” or “install.exe”, and then click on it to start the installation.
Sometimes, there is no installer because you have to install your driver through the Windows “Add a device” function. You can find instructions for installing printers in the Windows Help file. Our Mac OSX files are also self-extracting. These files must be downloaded and executed in the same way. The installer will be present on the desktop once completed: click on it and follow the instructions to install it.
Edup EP-9602GS PCIe Driver Download
Edup EP-9602GS Driver Download
Edup EP-9602GS Driver For Windows
Download