Asus ROG GL703VD Wireless Driver Download

Asus ROG GL703VD Wireless Driver – Asus ROG GL703VD Wireless driver is a software component that allows the operating system to communicate with Asus ROG GL703VD Wireless Adapter Card.

If you own Asus ROG GL703VD and looking for wireless drivers, you have landed on the right site. You can download Asus ROG GL703VD Wireless driver here, with a simply click on the “Download Link” below.

The Strix GL703VD comes with the Aura RGB keyboard, which offers customizable RGB lighting (3 levels of brightness + off) and allows the user to configure various colors and effects in the four colored areas. With almost 2 mm, the key press is a notch above most laptops, although it is still significantly shorter than the one offered by Asus in the ROG Strix GL753VD 2.5 mm. However, depending on the game scenario, a shorter fall may not be a disadvantage. The writing experience is a mixture of combinations: there is a slight curvature in the uppercase keys, which contributes to the precision of the writing, but the comments are somewhat absent and are a bit too sweet for our taste. The space bar is wider on the left side and three of the four arrow keys are located below the keyboard for better isolation and ergonomics of the game.

Speaking of the space bar: although most of the keys are very quiet, the spacebar is a bit more invasive and its noise can disturb some noise sensitive environments. There is also a set of four buttons dedicated to the left on the row of function keys, which allow the user to mute, increase or decrease the volume and launch Republic of Gamers Gaming Center. The touchpad, which measures 10.4 x 7.1 cm, uses the precision drivers of Windows 10 and works well enough for cursor control and gestures. The surface is smooth, which allows the fingers to slide easily, even if the wet fingers tend to stick a little while working. The left and right clicks offer a good amount of audible and haptic comments. Many users will probably use a mouse for external games. Therefore, the quality of your substitute and its ergonomics may not be of the utmost importance. Maintenance is completed with the secondary RAM slot (in our case, empty), the M.2 SSD drive and the 2.5-inch hard drive bay hidden behind an irregularly shaped maintenance cover on the bottom. To clean the system fans or to access the other RAM slot, you must remove the bottom plate, which is also quite easy to accomplish after removing 13 Phillips screws, three of which are hidden under the maintenance hatch mentioned above . Note that although our evaluation unit is equipped with a SATA SSD hard drive, the M.2 connector can also host PCIe / NVMe SSDs.